Pool table movers with disassembly + re-level

A pool table does not move in one piece. The slate slabs come off the frame (often three pieces, sometimes one), the felt comes off the slate, the rails detach from the frame. We disassemble at origin, transport every component with the right packing, and reassemble with a full re-level at destination. A pool table that arrives un-leveled is a pool table that plays badly forever.

• Risk 01

  Slate is heavy and brittle

  Each slate slab on a 9-foot table is 200–250 lb of brittle stone. Drop it and it cracks; carry it wrong and it cracks. We carry slate flat, on padded dollies, two-person minimum per slab.

• Risk 02

  Felt cannot be reused if torn

  New felt is $200–$400. We remove felt carefully at origin and protect it during transport. If your felt is older than 5 years, we recommend new felt at destination — included in our pricing if requested.

• Risk 03

  Re-level is the move

  A table that is not perfectly level plays terribly forever. We re-level at destination using shims and a precision machinist level — not a smartphone app. The table plays the same as it did before the move.

1. 01

   Disassembly + felt removal

   Rails first, then felt, then slate. Each step documented and bagged. Hardware labeled to the corresponding component.

2. 02

   Slate transport

   Each slate slab transports on its own padded dolly. Slabs ride flat — never on edge.

3. 03

   Reassemble + re-level at destination

   Frame, slate, felt, rails — in order. Then a full re-level with the machinist level. We do not leave until the table reads dead-flat in every direction.

• Piano Movers
• Gun Safe Movers
• Pool Table Movers
• White-Glove Moving